How to use Water service tube (VP) and electric wire tube (VE)

There are various kinds of hard vinyl chloride pipes. Electric wire tube (VE) might sometimes be used though water service tube (VP) is usually used for the drain construction of the air conditioner. When it doesn't know the size to connect these mutually, it doesn't become it.

When the air conditioner of the ceiling hanging type is installed, the drain early piping of the vinyl chloride pipe might be done. VE16 and a normal pipe bend were laid as a drain drainpipe at electrical work this time.

Well, how even the connection point of the drain drain of the air conditioner had been laid at this time worried. Then, the interconnection of the water service tube and the electric wire tube was examined and I want to record.

Size of water service tube (VP) often used and electric wire tube (VE)

Water service tube(VP) Electric wire tube(VE) The unit is [mm] and an other size.
  Outside
diameter
Thickness Inside
diameter
  Outside
diameter
Thickness Inside
diameter
 
VP13 18 2.5 13 VE14 18 2.0 14 The outside diameter is the same as VP13 and VE14.
VP16 22 3.0 16 VE16 22 2.0 18 The outside diameter is the same as VP16 and VE16.
VP20 26 3.0 20 VE22 26 2.0 22 The outside diameter is the same as VP20 and VE22.
VP25 32 3.5 25 VE28 34 3.0 28  
VP30 38 3.5 31 VE36 42 3.5 35  

Using for the drainpipe, using the water service tube and the electric wire tube

The outside diameter size is quite the same as "VP13 and VE14", "VP16 and VE16", and "VP20 and VE22" from the table above. If an elbow, a socket, and a normal pipe bend are used in a word, it is possible to connect it mutually.

Moreover, it can be easily done to convert the thickness of the drain drainpipe freely if the strange appearance socket of VP is used and to use it.

When you use a normal pipe bend

If the strange appearance socket is not used and a normal pipe bend of the electric wire tube is used, it becomes it as well as the outside diameter of one high rank because the thickness of a normal pipe bend of VE14, VE16, and VE22 is 2mm.

In a word, the outside diameter of a normal pipe bend of VE14 (18mm in the outside diameter) becomes it as well as outside diameter (22mm) of VE16(VP16). The socket of VP16 can be used as it is.

The outside diameter of a normal pipe bend of VE16 (22mm in the outside diameter) becomes similar as well as outside diameter (26mm) of VE22(VP20). The socket of VP20 can be used as it is.